So no photo?

Submitted by pa0akv on Mon, 03/31/2008 - 14:49.

I discovered why the photo can't be seen! I placed the html page on the url instead of the filename of the photo!!

Stupid me. The first photo is the 40m pcb mounted in a small box 60*40* 25 mm

This box is also made with the CNC milling tool, see the next photo.

To milling tool is made from a standard  PROXON MF70 $200,-- I added three stepping motors and three stepping controllers and a standard 2A 12V power supply. Now I can controll the X-Y and Z axis. For frontplate drawings and conversion to CNC code I am using Frontmaker about $75,-- and KCAM about $100,-- software. For milling PCB's I use Sprint Lay-out about $50,-- and after conversion the issolation milling file to CNC code the 0,7 mm mill will do the rest.

box

 milling tool1

There is a way of inserting

Submitted by k5nwa on Thu, 04/03/2008 - 09:15.

There is a way of inserting a photo that on in the Internet without copying it into this server, I will need to add that to the procedure on adding photos. You can see an example in the test area, but you can't see how I did it.

By the way that is a nice setup, great for making front panels.

 

Cecil

k5nwa

"Blessed are the cracked since they shall let the light in"